欧美内射美女,亚洲欧美在线一区二区观看,亚洲国产精品一二三区,日韩巨乳佐山爱中文字幕

產品分類
聯系人:劉水紅

電話:0755-82515004

手機:13760205028

公司地址:深圳市福田區深南中路3037號南光捷佳大廈
Email:liu56817@126.com
QQ:528642442
  • 產品名稱:Vermason 222547校準器

  • 產品型號:用于校準手腕帶和工鞋接地測試儀
  • 產品廠商:其它品牌
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
Vermason 222547校準器 Calibration Unit for Vermason Wrist Strap and Footwear Tester用于校準手腕帶和工鞋接地測試儀適配儀器:222504, 222506,222507, 222562, 222563, 222564, 222565,Vermason(DESCO子品牌)
詳情介紹:

Vermason 222547校準器 Calibration Unit for Vermason Wrist Strap and Footwear Tester
用于校準手腕帶和工鞋接地測試儀
適配儀器:222504, 222506,222507, 222562, 222563, 222564, 222565
Vermason(DESCO子品牌)

Operation
The Tester Calibration Unit was specifically designedfor use in calibration of Vermason brand equipment.The following procedures will not cover adjustment of
the test equipment. For detailed information regardingadjustment of specific Vermason brand testers, pleasecontact Desco Europe Customer Service.

Frequency of recalibration should be based on thecritical nature of those ESD sensitive items handled andthe risk of failure for the ESD protective equipment andmaterials. In general, we recommend that calibration be
performed annually.

Testing the Compact Tester
WRIST STRAP CIRCUIT
1. Connect the 10 mm lead from the Calibration Unitto the wrist strap stud on the Compact Tester.
2. Select 715K FAIL LOW on the Calibration Unit.
3. Press and hold the Calibration Unit’s test probeon the Compact Tester’s test plate. The testershould indicate a FAIL LOW condition.
4. Select 785K PASS LOW on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
5. Select 33M PASS HIGH on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
6. Select 37M FAIL HIGH on the Calibration Unitand repeat the test. The tester should indicate aFAIL HIGH condition.

FOOTWEAR CIRCUIT
1. Connect the 10 mm lead from the Calibration Unitto the 10 mm footwear stud on the Compact Tester.
2. Select 715K FAIL LOW on the Calibration Unit.
3. Press and hold the Calibration Unit’s test probeon the Compact Tester’s test plate. The testershould indicate a FAIL LOW condition.
4. Select 785K PASS LOW on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
5. Select 33M PASS HIGH on the Calibration Unitand repeat the test. The tester should indicate aPASS condition.
6. Select 37M FAIL HIGH on the Calibration Unit andrepeat the test. The tester should indicate aFAIL HIGH condition

姓名:
電話:
您的需求:
 
蓬溪县| 奎屯市| 阜宁县| 万盛区| 历史| 山东| 西林县| 定襄县| 蕲春县| 澄江县| 调兵山市| 宜川县| 高尔夫| 临猗县| 鱼台县| 泸州市| 中西区| 新野县| 两当县| 杂多县| 隆德县| 大渡口区| 马关县| 仙游县| 怀安县| 前郭尔| 望谟县| 鹤壁市| 黑河市| 秀山| 永德县| 罗源县| 井陉县| 富平县| 铅山县| 奎屯市| 临邑县| 和静县| 漳平市| 乃东县| 彭水|